汽配人首頁 > 問答首頁

MODEL?S輪胎怎么樣

MODEL S輪胎怎么樣: 問提問者：網友 | 2018-07-17

最佳回答

您好，收到求助，以下為原文對應的翻譯，請參考: 1. 輪胎必須有經過培訓的專業人員進行安裝。 1. Only allow proper trained and qualified persons to assemble the tyre. 2. 輪胎必須裝配在規定的車型和輪輞上，安裝和拆卸輪胎要用專門的工具和器械，嚴禁硬撬、硬砸。 2. Be sure to assemble the tyre on required vehicle model and wheel rim. Use proper tools and appliances to assemble and disassemble the tyre. Do not use brute forces. 3. 同一車軸，應裝自己相同規格、結構、花紋和層級的輪胎。 3. Assemble the compatible specification, type, pattern and ply rating of tyre on each one of the wheel shafts. 4. 斜交輪胎和子午線輪胎不能混裝。 4. Do not mix bias ply tyre with radial tyre when assembling. 5. 裝配有向花紋輪胎時，應使輪胎的旋轉方向標志與車輛行駛方向一致。 5. When assembling the tyre with directional tread pattern, the directional mark should be in accordance with the driving direction of vehicle. 6. 裝有防滑鏈的輪胎，要對稱裝用，不用時應立即卸掉。 6. Assemble the tyre with skid chain symmetrically. Disassemble the skid chain when not using it. 7. 安裝輪胎時應檢查輪輞是否符合標準，不得使用損壞或變形的輪輞，無內胎輪輞還要檢查氣門嘴的氣密性。換新的無內胎輪胎時，最好同時換上新的氣門嘴。 7. Check if the wheel rim is in good condition when assembling the tyre. Do not assemble: 回答者：網友

產品精選

我來回答